• • Phase 2 foundation pour
• • Exterior and interior metal framing
• • Roof, staircase, and mezzanine installation
• • Mechanical, electrical, and plumbing rough-in
• • A/C and fire sprinkler placement

Despite a slight delay in construction activities due to COVID-19, Phase 2 is in its final stages and we can see the substantial completion date in our sights.

Mid-March we saw the completion of the exterior metal framing, just in time for insulated metal panels that were lifted and placed into position. Each wall of Phase 2 had approximately 60 of these metal panels installed, which match the exterior paint of the Phase 1 tilt walls.

Just as we were making some major headway, the stay-at-home address came from Washington State Governor Inslee, temporarily shutting down both Tool Gauge and Washington Patriot Construction for two weeks.

Mid-April marked the first day of construction after the shutdown lifted and Washington Patriot immediately went to work with the help of Sound Glass installing windows, Alliance Steel installing our new metal canopy, and doors throughout the building.

If you’ve been keeping an eye on our time-lapse video from WorkZone Cam, you might have noticed the majority of exterior work has been completed. Construction activities for the remainder of April focused on the interior of the building, as Washington Patriot installed permanent power and drywall.

An infiltration trench to help collect rain water from adjacent surfaces was built in early May, where our new parking would soon be.

Throughout May, construction activities included installation of light fixtures, security cameras, and restroom tile. Long Painting came in and started giving the new walls a fresh coat of paint after all drywall was taped and textured. The last week in May, our second plastics parking lot was paved along with a smooth coat of asphalt on South Adams St.

We’re at the tail end of construction activities as we near the substantial completion date of June 26^th. Over the next couple of weeks, Washington Patriot will finalize interior paint, and restroom tiling, irrigation and new landscape, and floor installation. 

Tool Gauge employees will be able to move into Phase 2 beginning of July as we have new furniture delivered and the installation of Canteen Avenue C Micro Market. We’re also looking forward to our new paint equipment being delivered and installed in the upcoming months.

Once Phase 2 is complete, the new area with house an industry-leading paint line, new QA lab, training area/lunch room, employee lockers, offices and a customer lobby. All together, the Tool Gauge expansion project will include:

• • 80,000 sq ft in our plastics division
• • Expansion of our plastics press size range
• • Broadened secondary operations to improve flow and ergonomic assembly
• • Installation of industry-leading vertical paint system
• • New research and development center
• • Implementation of multiple collaborative robots (cobots)
• • 2,000 sq ft allocated for CNC machines and equipment within our metals division

Keep track of all the construction activities on our social media channels (LinkedIn, Twitter, Facebook, and Instagram) and through our live Workzone Camera.

The post Facility Expansion Update – Summer 2020 appeared first on Tool Gauge.

Based on the stay-at-home order from Governor Inslee on March 23, 2020, and the temporary shutdown of Boeing Puget Sound, Tool Gauge temporarily shut down from March 26 through April 16^th.

As we plan to bring back partial crews to support non-Boeing Puget Sound shipments, Tool Gauge leadership and management teams have placed COVID-19 best practices to keep everyone safe and healthy while in the office and on factory floors. Best practices include prevention, protection and containment strategies:

Prevention

• • Informed employees of COVID-19 symptoms to watch for through CDC approved fliers, signage, and updates posted on internal applications.
• • Signage with enhanced PPE requirements has been posted throughout metals and plastics facilities near time clocks.
• • Nitrile gloves, safety glasses, face masks, and hearing protection have been provided to all employees working.
• • PPE are placed in optimal areas near doors and time clocks for distribution with clear explanations of proper usage.
• • Common areas such as lunchrooms, bathrooms, conference rooms, and all doors will be cleaned 4 times daily. Cleaning logs have been implemented and placed in each area, requiring a date, time and employee number of when it was cleaned.
• • All doors are to remain open to reduce exposure.
• • Signs are posted throughout both facilities to encourage people to wash their hands frequently, using soap, and washing for a minimum of 20 seconds.

Protection

• • Social distancing is in place, with a 6 ft separation policy in place. We’ve taped X’s and lines throughout both facilities indicating where people should stop when approaching work cells.
• • Break times have been staggered to allow a minimum of 6 ft separation at lunch tables.
• • Cleaning stations have been placed throughout offices and on the factory floors. Employees have quick access to cleaning equipment such as disinfectant wipes, paper towels, Lysol spray, etc.
• • Implementation of self-check screening tools.
• • Restricted all international business travel and any external meetings and personnel.
• • Staff who can work remotely have been encouraged to do so.
• • Communicate with all staff via email and internal applications on COVID-19 updates and temporary shutdown dates
• • Producing DtM Face Shields for Washington State, click here for DtM Face Shield assembly steps and instructions for use

Containment

• • Mandated quarantine for employees testing positive for COVID-19.
• • Identify and contact employees who may have been in contact with employee(s) displaying symptoms and mandate quarantine.
• • Close contaminated work area or facility.
• • Start disinfection procedures of contaminated areas.

Best practices have been distributed through multiple forms of communications via posted flyers in both metals and plastics divisions, internal applications and emails, and social media. We will continue to update our employees, customers, and suppliers of our best practices, temporary shutdown updates, and COVID-19 news in the Puget Sound region.

For more information on preventing the spread of COVID-19 and other respiratory illnesses, visit the CDC or your state’s Department of Health website.

If you are interested in purchasing Face Shields from Tool Gauge, please click here for more information or contact us at sales@toolgauge.net.

Click here for DtM Face Shield assembly steps and instructions for use. 

The post Best Practices & Policies During COVID-19 appeared first on Tool Gauge.

At Tool Gauge, we have a long-term commitment to producing top quality products with the highest manufacturing standards for the aerospace industry and in other sectors.

In the midst of the novel Coronavirus, we are continuing our daily operations with the safety and wellness of our employees, customers, and community in mind. We will continue to produce plastic and metal parts and assemblies and have the capacity to meet any additional orders that may aid the medical plastic(s) and parts demand related to the coronavirus outbreak.

If your organization has questions about our plastic injection molding or CNC machining capabilities, please contact us today or refer to our Plastics and Metals Parts and Assemblies pages for more information.

The post COVID-19 Relief: Manufacturing Capabilities appeared first on Tool Gauge.